1X8 Distribution Amplifier, metered, +22dBm Transformer Output, Term Strip I/O

1.529,90 € HT
1.829,76 € TTC
Catégorie : Distributeurs
Marque : ATIAUDIO
Référence : DA1008-1
With its new higher power output and lower noise, the updated DA1008-1 is ideal for every application and every budget. With the DA1008-1, you’ll avoid RF and hum pick-up problems from noisy, lossy splitters, eliminate hard-to-find shorts from multiple taps on critical lines, boost low console outputs, drive long lines and eliminate rolloff and distortion from mismatched load impedances.
Disponibilité : 2 semaines
 
The DA1008-1 is designed for desktop mounting, and can be rack mounted in 1RU of space with our 21181-501 Accessory Rack Mount Kit. Reliable barrier block connectors with fan-out strips for easy prewiring and quick change servicing are standard.
The 1X8 DA1008-1 comes with 8 individually adjustable outputs and includes true transformer balanced outputs. An LED meter with three selectable 0VU settings allows you to set nominal line levels and monitor peak headroom. The VU Meter can be switched to read every channel. An Input Clipping LED and a boosted headphone output are included.
This high-performance DA is ideal for broadcast and professional environments.
OUTPUTS LEVELS: DA2016 & DA1008-1 or -2 +26dBm
DISTORTION: .001% typical, 20 to 20kHz
FREQUENCY RESPONSE: ±0.25dB, 30 to 20,000 Hz
NOISE: -100dBm EIN 20Hz to 20kHz
HUM REJECTION: 80 dB common mode, 60 to 120Hz
CROSSTALK: 70dB minimum @ 1kHz
INPUT IMPEDANCE: Balanced differential inputs, 30k ohm bridging
GAIN: 24dB, front panel screwdriver adjustable
POWER: 115/230 VAC ±10%, 47-63 Hz
SIZE : 17” (43.2cm) W x 1.75” (4.5cm) H x 10.5” (26.7cm) D;
METERING: Electronic SCAN switching; 12 segments, 3 color, peak reading LED, level indicator; 0 VU selectable to +4, +8, or +1 8dBm by front panel switch; LED channel indicator
HEADPHONE OUTPUT: 20 volt p-p output to 600 ohm phones, 30mW output to low impedance phones
MOUNTING: Suction feet for non-slip desk mounting. Optional Rack Mount system 21181-501 mounts unit in 1RU 19-inch rack.
WEIGHT: 15 lb (7kg)
CONNECTORS: High density screw terminal barrier blocks. Fanning strips supplied for easy installation.
MODELS: 15 lb (7kg)
DA1008-1 1 x 8 Transformer Balanced outputs +26dBm output