2 CH Bargraph Meter Display – VU response (Incl. External PwrSply)

417,90 € HT
499,81 € TTC
Catégorie : Vu-mètres
Marque : ATIAUDIO
Référence : BGD200-VU
Your BGD200 and BGD400 bargraph audio displays are an effective and economical
means of displaying multiple audio lines. They can give you that warm comfortable
feeling that there really is audio going out with your video, audio is feeding the switcher,
and there definitely are outputs to your phone.
Disponibilité : 2 semaines
 
Along with providing a nice touch of color for your studio, the BGD200-VU and
BGD400-VU provide a good visual match to the ballistics of a standard ASA VU meter
in bright, three color, and ten segment displays. The BGD200-PPM and BGD400-PPM
closely match the peak following characteristics of a standard PPM meter in a more
conservative red and green color scheme. The BGD200 is a horizontal two-channel
display and the BGD400 is a four-channel unit with vertically oriented displays.

BGD200-VU 2 Channel Bargraph Meter Display - VU Response
  • Modèle économique en 1/3 de 19 pouces.
  • Kit de mise en rack pou r 1 ou 2 ou 3 unités
  • Diodes progressives
  • Avec ou sans prise casque
  • Au choix, niveau VU ou VU/PHASE
  • Alimentation avec passage en sonde
INPUT IMPEDANCE Balanced bridging 20K Ohm Minimum
INPUT LEVEL 0dB internal selectable @ -10dBu, +4dBu or +8dBu (normal set up @+4dBu)
NOTE: Front panel trimmers allow for precise calibration at 0 VU.
FREQUENCY RESPONSE 20Hz to 20kHz
INDICATOR VU Three colors: Green, Yellow and Red.; -20, -10, -7, -5, -3, -1, 0, +1, +2, +3
PPM; Two Colors: Green and Red; -15, -12, -9, -6, -3, 0, +3, +6, +9, +12
METER RESPONSE VU ballistics per ANSI C165, PPM ballistics per DIN 45406
POWER 24 VDC Nominal. (Range 22V min to 30V max) from external DC Wall
Adaptor or Table Top Power Supply BGD200 requires 70mA; BGD400 draws 140mA
DIMENSION IN (cm) 1.72 (4.45) H x 5.75 (14.6) W x 6.00 (15.21) D;
MOUNTING Free standing or rack mountable; one, two, or three units in 1-3/4" rack space
CONNECTORS Two piece quick release screw plug connector per input.
POWER SUPPLY WA100-1 Wall mount power supply (UL), 24VDC @.4 amp, ;115VAC/60 Hz. For use with multiple units. WA100-2 Table top power supply,
24V @.4 amp, 230VAC/50-60 Hz with IEC
320 Male 3 pin AC input connector. User supplies matching AC line cord for use with local power system.
Weight 1.5 lb. (.7Kg) Net
20602-1 DC power cable to loop through the DC power between NANOAMPS, 13 inches long with DC plugs on each end.
WARRNTY Limited, One Year Warranty