2 CH Unbalanced RCA to Balanced XLR Converter – Transformer Isolated Outputs

The DP100 is a uni-directional stereo interface for Playback Only applications. It is designed specifically to convert the unbalanced RCA outputs of Digital Compact Disc Players to transformer balanced and isolated XLR 600-ohm line levels with no compromise or degradation of the superb performance available from the digital audio source. The DP100 is equally at home on a newsroom desk to interconnect field ENG cassette recorders into broadcast systems for dubbing.
All controls and connectors are recessed for protection and their identification markings are printed on the protected reverse side of a heavy-duty polycarbonate overlay. All power supply components are internal and are well shielded by the steel wrap-around. Keyhole slot mounting angles are supplied with the unit to assure secure mounting to shelves and desks. An accessory rack panel mounts one or two units side-by-side in a single 1-3/4 inch rack space.

Unbalanced to Balanced:
GAIN	+14db nominal, +22db maximum. User adjustable to 0, +4 or +8dBm output with –10dBu (.25V) input.
NOMINAL LEVELS	-10dBu (.25V) in, +4dBm out
PEAK LEVELS	+8dBu (2.0V) in, +22dBm out
MAXIMUM LEVELS	+24dBu in, +23dBm out
NOISE OUTPUT 20-20KHZ Meas. Band.	90dBm maximum
HUM OUTPUT 60, 120, AND 180 Hz.	-96dBm maximum
DYNAMIC RANGE Peak levels to Noise	120dB
HARMONIC DISTORTION 20HZ TO 20,000Hz
INTERMODULATION DISTORTION	.005% max. at Nominal Level
SMPTE, 7K/60Hz, 4:1	.005% max. at Peak and
Nominal Level
FREQUENCY RESPONSE	+0, -.25db, 20 to 20,000Hz.
	–3db at .5Hz and 150kHz
CROSSTALK	70 db minimum at 10kHz in all modes
INPUT HUM REJECTION	N.A.
INPUT IMPEDANCE	Unbalanced, 10,000 ohms Split and RF Bypassed
OUTPUT IMPEDANCE	Transformer Balanced, 40ohms maximum source
impedance. 600/150 ohms load impedance.
SLEW RATE	13V/uSec
RISE TIME	2 uSec.
OVERSHOOT	2% maximum
PHASE SHIFT 20 TO 20,000Hz	10 degrees max. input to
output. Less than 2 degrees between channels.
POWER	115/230 VAC +/-10%, 47 to 63 Hz, 6VA.