Analog audio embedder.

949,90 € HT
1.136,08 € TTC
Catégorie : Mux-Démux
Marque :
Référence : SMX6810N
SMX6810N Analog Audio Embedding Module
Disponibilité :
 
The SMX6810N are analog audio embedding modules. It has embedded SDI output with reclocking. The only difference between two modules is the SMX6810NS features audio tracking in addition to all functions that the SMX6810N offer. Both modules support 4-channel analog audio embedding. The user can choose either input audio or other audio synthesized by system and embed them into any audio group.
  • Supporting audio embedding in 525/625 video format
  • Supporting 4-channel audio embedding
  • Supporting 20-bit,24-bit audio embedding
  • Embedded audio group and mode selectable
  • SDI output with equalization and reclocking
  • One analog video output monitoring
  • SD-SDI video input auto detection and input status feedback
  • Supporting 4-channel audio metering display
  • tone at fixed frequency rate
  • Supporting 1.3 second at maximum audio delay
  • Supporting audio gain adjustment,invert and mute
  • Input EDH monitoring
  • Re-insert EDH
  • Auto detect freeze frame, black field and video loss
  • Monitoring audio loss and audio overload
SDI Video Input:
Signal Standard SMPTE 259M;270 Mbps,
525/625 SD component
Impedance 75 ohm
Return Loss >18dB to 360MHz
Connector BNC (IEC169-8)
Equalization Auto equalization to 30dB@270 Mbps
Analog Composite
Video Output
Signal Standard NTSC, PAL or PAL-M
Level 1Vp-p +/-3dB
Impedance 75 ohm
Connector BNC (IEC169-8)
Return Loss >40 dB to 5 MHz
DC Offset 0V±0.05 V
Frequency Response ±0.2 dB to 5 MHz
Differential Gain <1%
Differential Phase <1.5°
Group delay +/-10ns to 5 MHZ
SDI Video Output:
Signal Standard S SMPTE 259M-C&#65307;270 Mbps&#65292;
525/625
Connector BNC (IEC169-8)
Impedance 75 ohm
Return Loss >18dB to 270MHz
Signal Level 800 mV ± 10%
DC Offset 0 V ± 0.5 V
Rise and Fall Time 400 to 1500ps&#65288;20% to 80% of amplitude&#65289;
Overshoot amplitude <10% of amplitude
Jitter <0.2 UI&#65288;740ps&#65289;peak&#65292;typical<500ps
Analog Audio Input:
Connector 3-pin
Analog Input Level 28-16dBu
Impedance >30Kohm
Frequency Response +/-0.05dB (20-20KHz)
THD+N 95dB, 20-20KHz@-3dBFS
Crosstalk -95dB(20-20KHz)
DATA IN:
Input Impedance 75ohm/high impedance (jumper selectable)
Input Sensitivity 500mV pk to pk(minimum value)
Input Cable Length 100 meter
Return Loss <-20dB
Power Consumption:
Power 3.5W
Positive Rail 500 mA
Negative Rail 10 mA