Convertisseur Digital vers Analogue

The 9011 is a 10-bit SDI SMPTE 259M-C to analog composite, Y/C, component YPbPr, and RGB converter. The 10-bit encoding engine oversamples 4:2:2 to 4:4:4 for internal processing, and then 4x oversamples the outputs to 16:16:16 for improved signal performance. An internal VCXO with de-jitter loop filter to 2Hz reduces digital jitter prior to encoding, improving burst stability on composite and Y/C signals. A reference circuit color frames the 9011 for timed environments with full user digital proc. control.

• Four user configurable analog outputs: composite, component (YPbPr & RGB) and Y/C outputs
• Supports component BetaCam™, MII™ and SMPTE/N10
• Encoding to 16:16:16 over sampled outputs
• 10-bit digital video path
• Internal de-jitter filter to 2Hz
• Four reclocked SDI outputs
• Internal color bar generator
• User configuration switches on board edge
• User proc. configuration control of video levels
• Five year warranty
• Remote monitoring via DashBoard™ software or OGCP-9000 remote control panel

Input	270-Mbit SMPTE 259M-C
Digital Output	Four reclocked SDI
Analog Output	Four outputs user configurable: all composite, composite & component or composite with Y/C YPbPr or RGB
Output Jitter	Internal digital de-jitter filter to 2Hz
D/A Process	4x or 2x over-sampled (16:16:16 or 8:8:8)
Frequency Response	5 MHz ± 0.15 dB
	0-6.75 MHz ± 0.25 dB
SNR	> 70 dB
Proc. Control	Digital control of gain, DC, saturation & hue, filtering, gamma correction and
	DNR with user values saved and factory presets
Power	6 watts