DA/Encoder/D to A SDI to Analog Composite

The 5540 is a full-featured, legacy* digital frame compliant high-quality 10-bit SDI SMPTE 259M-C to analog composite, Y/C and component YPbPr and RGB. The 10-bit encoding engine over samples 4:2:2 to 4:4:4 for internal processing and then 4x over samples the outputs to 16:16:16 for improved signal performance. An internal VCXO with de-jitter loop filter to 2Hz reduces digital jitter prior to encoding, improving burst stability on composite and Y/C signals. A reference circuit, color frames the 5540 for timed environments with full user digital proc. control.

• 10-bit digital video path
• DNR and gamma control
• Encoding to 16:16:16 over sampled outputs
• Five year warranty
• Four user configurable analog outputs: composite, component (YPbPr & RGB) and Y/C outputs
• High quality 10-bit digital to analog conversion
• Internal color bar generator
• Internal de-jitter filter to 2Hz
• Reclocked SDI outputs Supports component BetaCam™, MII™ and SMPTE/N10
• User configuration switches on board edge
• User proc. configuration control of video levels

Analog Output	Four outputs user configurable: all composite, composite & component or composite with Y/C YPbPr or RGB
D/A Process	4x or 2x over-sampled (16:16:16 or 8:8:8)
Digital Output	4 reclocked SDI (3 w/reference in)
Frequency Response	5 MHz ± 0.15 dB, 0-6.75 MHz ± 0.25 dB
Input	270 Mbit SMPTE 259M-C
K-Factor	< 0.7%
Output Jitter	Internal digital de-jitter filter to 2Hz
Power	5.5 watts positive rail0.5 watts negative rail
Proc. Control	Digital control of gain, DC, saturation & hue, filtering, gamma correction and DNR with user values saved and factory presets
S/N	> 70 dB
Size	10.5\" x 3\" (263x75mm)
Fits legacy* frames