DA/Encoder SDI to Analog Monitoring and SDI Distribution Amplifier

The 5040 is a legacy* digital frame compatible card that provides SDI video to analog composite, Y/C and component (YPbPr/RGB) conversion and reclocked serial digital video output. It allows the end user to select the analog or digital output configuration as needed for a given application. The analog output gain control and card configuration switch is adjustable from the card edge while the card is mounted in the frame.

• 0-5 MHz ± 0.25 dB
• 8-bit processing, 10-bit DAC
• Automatic configuration NTSC/PAL
• Built-in color bar generator (analog outputs only)
• Five year warranty
• Four user selectable digital or analog outputs
• Input signal presence indicator
• SDI SMPTE 259M-C to analog composite, component or Y/C
• Two dedicated composite analog outputs
• Two dedicated SDI reclocked outputs
• Video gain control accessible on card edge

Analog Output	2-4 depending on user output configuration composite, Y/C and/or component in RGB or YPbPr
Digital Output	Reclocked 2-4 depending user output configuration
Frequency Response	0 -5 MHz ± 0.25 dB
Indicators	One data lock indicator
Input	270 Mbit SMPTE 259M-C
K-Factor	< 1.5%
Noise	> 70 dB
Power	Positive rail 6.5 watts; negative rail 0.5 watts
Size	10.5" x 3" (263x75 mm)
Fits legacy* frames