DISTRIBUTEUR AUDIO NUMERIQUE. Nouvelle série 2 à 2 entrées XLR 1X12 ou double 1X6 Digital Audio DA, jusqu'a 192kHz SR, Switchable Re-clocking, XLR I/O

Le panneau avant vous permet de configurer le DDA-212XLR entre Dual 1X6 ou 1X12. La fonction re-clocking on/off vous permet de réduire le jitter sur des câbles de logues distances. Les voyants sur le panneau avant Sample Rate, Word Length, Fault Diagnostic and Pro/Consumer vous indiquent s'il y a une erreur dans le signal audio ou s'il n'y en a pas.
Le bouton EQ optimise les entrées de câbles longs. Les connecteurs Loop-thru permettent de connecter éventuellement un deuxième DDA-212XLR pour avoir plus de sorties. La série 2 est aussi disponible avec 2 entrées 1X6 avec le choix entrée/sortie XLR ou BNC.

• Sample rates from 27 to 192kHz
• Word lengths from 16 to 24 bit
• Lowest jitter, <300 picoseconds
• Propagation delay <25 nanoseconds
• Selectable Re-clocking, Surround capable
• Loop-thru inputs with switched termination
• Input sample rate indicators
• Input word length indicators
• Fault diagnostic indicators
• Pro/Consumer Mode indicator
• Automatic Input EQ for long line lengths
• Engineered by DaySequerra

INPUT
CONNECTORS	XLR female or BNC; paralleled input connectors for loop-thru expansion
LEVEL	XLR 0.2Vp-p minimum; BNC 0.1Vp-p minimum
IMPEDANCE	Transformer isolated, balanced and floating, XLR 110 ohms, BNC 75 ohms; terminating resistors may be switched in or out via front panel control
SAMPLING FREQUENCY	27 to 192kHz
CABLE LENGTH	> 1000 feet (300 meters) of 110 ohm cable with equalizer; 75 ohm coax allows longer runs
EQUALIZER	Automatic EQ for long lines via front panel push button
CLOCK	Regenerated from input signal with dual mode PLL or non-reclocked to preserve
	Surround coding, switchable
OUTPUTS
CONNECTORS	XLR Male or BNC Female, 6 or 12 depending on model
LEVEL	XLR 4Vp-p loaded; BNC 2Vp-p loaded
IMPEDANCE	XLR 110 ohms, balanced and transformer isolated; BNC 75 ohms, unbalanced
OUTPUT JITTER	< 300 picoseconds peak to peak.
PROPAGATION DELAY	< 25 nanoseconds
INDICATORS
INPUT FAULT (DDA-212 Only)	Input 1, Input 2; identifies input with error condition
INPUT TERMINATION	On, Off
INPUT SAMPLE RATE	32, 44.1, 48, 88.2, 96, 176.4 and 192 kHz
INPUT WORD LENGTH	16, 18, 20 and 24 bits
INPUT DIGITAL ERRORS	Bi-Phase/Parity, Validity, Non-Linear PCM, DTS-CD Signal
RE-CLOCKING	Off, On
MODE	Pro, Consumer
INPUT CABLE EQ	Locked, Enabled
INPUT SELECT	DDA-106: 1, 2; DDA-212: 1, Bridge, 2
POWER	LED indicates power is applied
POWER	Internal Supply, 115/230VAC (selectable via internal jumper) ±10%, 50/60Hz, 10VA,
	IEC320 3 pin connector
SIZE	1 RU Package, 19” (48.3cm) W x 1.75“ (4.5cm) H x 8.5” (21.6cm) D
WEIGHT	7 pounds (3.2 kg) net; 9 pounds (4.1 kg) shipping weight
WARRANTY	Limited, One Year Warranty