DOLBY(2CH) + AES/EBU(4CH) + ANALOG(8CH) 2RU

This is the professional audio decoder and monitoring equipment to be user-friendly to consider a new HD production and environment.It is capable of processing the high quality Audio and monitoring Dolby E, Dolby Digital (AC3),
HD/SD-SDI Embedded Audio Digital AES/EBU and Analog Audio signal.

• Multi-Audio Monitoring as a Whole-in-One.
• Ability to monitor all kinds of Audios(Dolby E, Dolby Digital
• AC3, HD/SD-SDI embedded audio, Digital AES/EBU,Analog Audio, etc)
• High quality broaduction processing, not a simple monitoring
• User-friendly equipment by a remote control based on IP to support SNMP.
• User-friendly button designed on the front pannel.
• Using a control button to choose the woofer or center.
• Specifications
• 2 Channel HD/SD-SDI Preset based Audio De-embedder(16channel)
• 2 Channel HD/SD-SDI Audio De-embedder PCM on 1/2, Dolby E on 3/4
• 2 Channel Dolby E and Dolby Digital(AC03) Decoder Stand alone alone or add-on
• 4 Channel Digital(Unbalanced 75Ω/Balanced 110Ω)Audio
• 8 Channel Analog Audio
• Premium Quality Drivers and Power Amplifiers
• Audio Level meter 8x53-segment
• Audio Level Meters Dynamics VU and PPM
• 8x53-segment Tri-Color LED Bargraphs Displaying
• Front Panel Summing of any Combination up to 16 Channels to the left and/or Right Speaker
• Center Speaker for Woofer or Center
• Left/Right Power Speaker(4Ω 8W~10W), Center Power Speaker(4Ω 20W~25W)
• SNMP LCD Controllers(RS-422)
• EIA-2 Multi Frame Unit
• Headphone Jack of High Sensitivity

AES/EBU Audio Output (Dolby E):
Connector	BNC or add-on bus
standard	SMPTE 276M for single ended
	synchronous or asynchronous
	PCM/AES
Number of Input	2
Sampling Ratio	48KHz Synchronous
Impedance	75Ω
Level	0.2V to 1Vnom
AES/EBU Audio Input:
Connector	BNC or D-sub
standard	AES-1992 for balanced
	synchronous or asynchronous
	PCM/AES, SMPTE 276M for
	single ended synchronous or
	asynchronous PCM/AES
Number of Input	04-avr
Sampling Rate	32KHz 96KHz
Resolution	24bits
Impedance	110Ω or 75Ω
Level	0.2V to 1V nom for BNC, 2V to
	7V for balanced operation
Electrical & Mechanical :
Input Voltage	100V-240VAC
Frequency	50/60 Hz
Power	150W
Dimension	482(W)X88(H)X345(D)mm
Weight	5.2Kg
OperatingTemperature	0˚C ~ 40˚C
AES/EBU Audio Output
& Dolby Digital(A3), Dolby E Output :
Number of Input	04-mai
Connector	BNC and D-sub 15Pin add-on bus
Resolution	24bits
Sampling Rate	SamplingRate48KHzsynchronous
Nominal I/O Delay	1 Frame
AES/EBU Audio Output:
Number of Output	4
Connector	D-sub 25Pin
Resolution	24bits
Analog Audio Input/Output:
Type	Balanced Analog Audio
Number	8 Channel
IN/OUT Connector	D-SUB 25P Male/Female