Decoder/A to D Y/C & Component Analog to SDI,

The 5590 is a legacy* digital frame compliant full-featured high quality analog to 10-bit serial digital converter with EDH. The 5590 accepts composite, Y/C and component YPbPr analog input signals and outputs SMPTE 259M-C 270 Mbit SDI with EDH. Differential inputs are included for ground loop rejection. A 4, 3 or 2-line comb or notch filter is user configurable for Y/C separation in composite mode. All modes have 2X 8:4:4 input over sampling. An output jitter VCXO reduces 270 Mbit jitter down to 2Hz. Full user digital proc. control, with user memory allows digital adjustment of gain, DC offset, saturation and hue.

• 10-bit A to D and digital video path
• 4 or 3-line adaptive comb filter for composite mode
• Composite, component YPbPr and Y/C inputs
• Differential inputs for power hum rejection
• Five year warranty
• Four 270 Mbit SDI outputs with EDH
• Internal color bar generator
• Manual or automatic input gain control
• Supports component BetaCam™, MII™ and SMPTE/N10
• User configuration switches
• User proc. configuration control
• User selectable (on/off) 75 ohm termination

A/D Process	8:4:4 2× over sampled
Analog Gain	Auto or manual mode
Comb Filter	4, 3 or 2-line adaptive / non-adaptive User selectable
Frequency Response	5 MHz ± 0.25 dB
Input	Composite, Y/C or component (YPbPr)
Input Type	Differential – all inputs
K-2T	< 1 %
Output	Four SDI SMPTE 259M-C with EDH
Output Jitter	< 0.14 UI measured with color bar input
Power	6 watts positive rail; 0.5 watts negative rail
S/N	> 52 dB
Size	10.5" x 3" x 1" (139x77x26mm)
Fits legacy* frames