- Accueil
- » Catalogue
- » Dual 1X4 Distribution Amplifier, +24dBm Output, Term Strip I/O
Dual 1X4 Distribution Amplifier, +24dBm Output, Term Strip I/O
592,90 € HT
709,11 € TTC
709,11 € TTC
Catégorie : Distributeurs
Marque : ATIAUDIO
Référence : DA2008-1
Avec sa nouvelle puissance de sortie plus élevée et un faible bruit, le DA2008-1 mis à jour est idéal pour chaque application et pour chaque budget. Le DA2008-1 vous évite le RF et le bruit du hum pick-up, diviseurs de lossy, empêche hard-to-find shorts du multiple taps sur les lignes critiques, amplifie les basses sorties de console, drive long lines et élimine rolloff et la distortion des impédances mal adaptées a la charge.
The DA2008-1 fits neatly on a desktop, or you can mount up to two units with our accessory 21075-501 Rack Mount Shelf.
The DA2008-1 comes with reliable barrier block connectors and fan-out strips for easy prewiring and quick-change servicing. The Dual 1X4 DA2008-1 has a single, high output, active balanced driver per channel that is resistively split into 4 outputs each, all driven at precisely the same level.
This economical unit features output clipping LEDs and a headphone/metering jack in a half rack package that you can mount singly or side-by-side in only 1RU of vertical space.
The DA2008-1 comes with reliable barrier block connectors and fan-out strips for easy prewiring and quick-change servicing. The Dual 1X4 DA2008-1 has a single, high output, active balanced driver per channel that is resistively split into 4 outputs each, all driven at precisely the same level.
This economical unit features output clipping LEDs and a headphone/metering jack in a half rack package that you can mount singly or side-by-side in only 1RU of vertical space.
| OUTPUT CLIPPING LEVEL: | +24 dBm/600 ohms |
|---|---|
| DISTORTION: | @ +24 dBm output |
| .2% maximum THD, 20Hz to 20kHz | |
| and input levels to +24 dBm | |
| FREQUENCY RESPONSE: | ±.25dB, 20Hz to 20kHz, –3 db at 100KHz |
| OUTPUT NOISE: | -70dBm maximum |
| 20KHz measurement bandwidth | |
| 600 ohm source impedance full gain | |
| HUM REJECTION: | 80dB for common mode hum inputs |
| INPUT IMPEDANCE: | Balanced differential inputs, 30,000 ohm bridging, +24dBm ;maximum input level |
| GAIN: | 26dB, front panel adjustable |
| OUTPUT ISOLATION: | 70dB minimum at 1 kHz, any output to any other output; unit will tolerate up to two shorted outputs with no reduction in headroom |
| POWER: | 115/230 VAC ± 10%, 47-63 Hz |
| SIZE: | 8-1/2” (21.6cm) W x 1-3/4” (4.5cm) H x 7” (17.8cm) D |
| SHIPPING WEIGHT: | 4 pounds (1.8kg) |
| MOUNTING: | Suction feet for non-slip desk mounting; Rack Mount Shelf 21075-501 mounts two units in one rack; 1/2 RU Filler Panel 21098-501 |
| WARRANTY: | Limited One Year Warranty |
