HD/DOLBY HD/SD-SDI(2CH) + DOLBY(2CH) + AES/EBU(4CH) + ANALOG(8CH)

10.939,90 € HT
13.084,12 € TTC
Catégorie : Moniteurs Audio rackables
Marque :
Référence : HDM-408 HD Dolby
This is the professional audio decoder and monitoring equipment to be user-friendly to consider a new HD production and environment.It is capable of processing the high quality Audio and monitoring Dolby E, Dolby Digital (AC3),
HD/SD-SDI Embedded Audio Digital AES/EBU and Analog Audio signal.
Disponibilité :
 
  • Multi-Audio Monitoring as a Whole-in-One.
  • Ability to monitor all kinds of Audios(Dolby E, Dolby Digital
  • AC3, HD/SD-SDI embedded audio, Digital AES/EBU,Analog Audio, etc)
  • High quality broaduction processing, not a simple monitoring
  • User-friendly equipment by a remote control based on IP to support SNMP.
  • User-friendly button designed on the front pannel.
  • Using a control button to choose the woofer or center.
  • Specifications
  • • 2 Channel HD/SD-SDI preset based audio De-embedder(16channel)
  • • 2 Channel HD/SD-SDI audio de-embedder PCM on 1/2 dolby E on 3/4
  • • 2 Channel dolby E and dolby digital(AC3) decoder stand alone or add-on
  • • 4 Channel digital(Unbalanced75Ω/Balannced110Ω) audio
  • • 8 Channel analog audio
  • • Premium quality drivers and power amplifiers
  • • Audio Level meters 8x53-segment
  • • Audio Level meters Dynamics VU and PPM
  • • 8x53-segment Tri-Color LED bar graphs displaying
  • • Phase-Correlation LED display
  • • Front panel summing of any combination up to 16 channels to the left and/or right speaker
  • • Center speaker for woofer or center
  • • Left/Right power speaker(4Ω 20W~25W)
  • • Center Speaker for Woofer or Center(4Ω 20~25W)
  • • Frequency response : ≤±5 dB(80Hz~20KHz)
  • • Left, Right, Center Adjustable volume
  • • Audio Level adjustable
  • • SNMP LCD control panel
  • • Rack controllers SNMP compatible(TCP/IP)
  • • Headphone Jack, Mutes Speakers
  • • 19'' Standard Rack Mountable(2RU)
  • • Remote Control
HD/SD Serial Video Input :
Standard 625/50 or 525/59.94 SMPTE
259M-C (270Mb/s) with SMPTE
272M embedded audio
SMPTE 292M (1.5Gb/s),
SMPTE 260M, SMPTE 274M,
SMPTE 296M, SMPTE 349M
1080i/59.94, 1080i/50,
720p/59.94, 720p/50
Equalization Automatic to 100m @ 1.5Gb/s
with Belden 1694A
or equivalent cable
Return Loss > 15dB up to 1.5GHz
Input 2
HD/SD Serial Video Output:
Standard Same as Serial Video Input
Signal Level 800mV nominal
DC Offset 0V ±0.5V
Rise/Fall Time 200ps nominal for HD,
Overshoot 750ps nominal for SD
Return Loss < 10% of amplitude
> 15dB up to 10Gb/s,
>10dB up to 1.5Gb/s
Wideband jitter <0.2UI
AES/EBU Audio Input (Dolby E):
Connector BNC or add-on bus
standard SMPTE 276M for single ended
synchronous or asynchronous
PCM/AES
Number of Input 2
Sampling Ratio 48KHz Synchronous
Impedance 75&#937;
Level 0.2V to 1Vnom
AES/EBU Audio Output
& Dolby Digital(A3), Dolby E Output:
Number of Input 4
Connector BNC and D-sub 15Pin add-on bus
Resolution 24bits
Sampling Rate SamplingRate48KHzsynchronous
Nominal I/O Delay 1 Frame
AES/EBU Audio Input:
Connector standard BNC or D-sub
AES-1992 for balanced synchronous or asynchronous
PCM/AES, SMPTE 276M for single ended synchronous or
asynchronous PCM/AES
Number of Input 4/4
Sampling Rate 32KHz 96KHz
Sampling Rate 32KHz 48KHz
(LED Bar)
Resolution 24bits
Impedance 110&#937; or 75&#937;
Level 0.2V to 1V nom for BNC, 2V to 7V for balanced operation
AES/EBU Audio Output :
Number of Output 4
Connector D-sub 25Pin
Resolution 24bits
Electrical & Mechanical :
Input Voltage 100V-240VAC
Frequency 50/60 Hz
Power 150W
Dimension 482(W)X88(H)X345(D)mm
Weight   5.2Kg
OperatingTemperature 0&#730;C ~ 40&#730;C
Analog Audio Input/Output:
Type Balanced Analog Audio
Input impedance 10K&#937;
Number 8 Channel
IN/OUT Connector D-SUB 25P Male/Female
Frequency response ±0.2 dB(20Hz~20KHz)
Total Harmonic Distortion 0.05 dB(20Hz~20KHz)
Signal-to-Noise Ratio -75dB(20Hz~20KHz)
Acoustic Distortion 8%