HD/SD-SDI RGB correcteur de couleurs

4.289,90 € HT
5.130,72 € TTC
Catégorie : Synchroniseurs
Marque : COBALT
Référence : 9084
HD/SD-SDI RGB Color Corrector with YCbCr Video Proc and Frame Sync
Disponibilité : 2 semaines
 
The 9084 is an RGB Corrector with YCbCr proc features and frame sync. It can process HD/SD SDI signals in all formats.

The RGB processing controls provide full offset, gain and gamma adjustments. The YCbCr proc controls provide lift, gain, saturation, phase, white clip (hard and soft), black clip, and color saturation clip. Parameter updates are very smooth and responsive, providing a completely real time feel.

Even though the card provides extensive control of the signal from the RGB perspective, it will continue to pass those signals that fall outside of the RGB gamut. Pluge and YCbCr limit ramp signals pass without modification. When the YCbCr saturation clip is activated, the saturation limiting operation will not affect the color phase.

The frame synchronizer can sync the video signal to any compatible reference, and provides full timing offsets. The frame sync minimum delay is only three lines, and can be disabled for operation in synchronous environments.

The 9084 can be controlled from the card edge menu, DashBoard software, the SNMP agent software in the frame, or the new OGCP-9000/CC, a remote control panel designed with a special emphasis for the 9084 Color Corrector.
  • HD/SD frame synchronizer
  • Passes all ancillary data, including embedded audio
  • Full RGB color corrector (offset, gain, gamma)
  • Extended YCbCr proc controls with white, black, and saturation clipping
  • Saturation clip does not cause hue (phase) shift
  • Passes entire YCbCr gamut in unity gain configuration
  • Color correction can be applied to entire frame or a sub region
  • One button bypass of color correction for comparison purposes
  • Parameter updates are smooth and responsive, excellent for on-air manipulation
  • On-card storage of 16 presets
  • Local control from full card edge menu with character display
  • Remote control/monitoring via Dashboard or OGCP-9000
  • Five year warranty
HD/SD-SDI Input One
Input equalization to 100 meters of Belden 1694
Auto sensing: Yes
HD/SDI-SDI Reclock Outputs Four
HD/SD-SDI Processed Outputs Four
Formats supported 1080i @ 60Hz, 59.94Hz, 50Hz
1080p @ 30Hz, 29.97Hz, 24Hz, 23.98Hz
1080psf @ 24Hz, 23.98Hz
720p @ 60Hz, 59.94Hz, 50Hz, 30Hz, 29.97Hz, 24Hz, 23.98Hz
625i @ 50Hz
525i @ 59.94Hz
Embedded Audio Passes through card: Yes
Compensation for asynchronous inputs (drops and dupes): No
Frame Sync Delay Minimum: 3 lines
Maximum: 3 lines + 1 Frame
Delay with FS disabled: > 200 samples
Additional Frames of Delay HD: 6
SD: 13
RGB Color Correction RGB Offset Control
(one per primary) :
-100% to 100% in 0.1% steps
RGB Gain Control
(one per primary) :
0% to 200% in 0.1% steps
RGB Gamma Control (one perprimary) :
0.125 to 8.0 in 0.001 steps
Controls from three primari
YCbCr Proc Amp Y Offset (Lift): -100% to 100% in 0.1% steps
Y Gain: 0% to 200% in 0.1% steps
C Gain (Saturation): 0% to 200% in 0.1% steps
Video Gain (affects Y and C): 0% to 200% in 0.1% steps
Color Phase: -180 degrees to +180 degrees
YCbCr Clipper Y Black hard clip
(values limited at or above):
-7.5% to 50% in 0.1% steps
Y White hard clip
(values limited at or below):
50% to 107.5% in 0.1% steps
Y White soft clip
(values rolled off at):
50% to 107.5% in 0.1% steps
Power 7.0 Watts