Moniteur Vidéo 7", 2 écrans, en rack

1.869,90 € HT
2.236,40 € TTC
Catégorie : Moniteurs Vidéo rackables
Marque :
Référence : RM7023-HDSDV
Disponibilité :
 
The RM7023 is a rack mountable unit that offers two 7.0" high-resolution active matrix TFT-LCD monitors, with a 16:9 aspect ratio. All SMPTE/ITU video standards and signal types are accepted and displayed on each screen of this model. Each panel also provides 4 channels analog audio and 2 pairs AES/EBU audio inputs and supports embedded audio, displays 4 channels audio meter (VU and PPM) in the picture, outputs 1 audio pair for monitoring via headphone jack. Built-in Red/Green tally lights from a rear panel connector can be interfaced to most tally systems. This unit is only 3RU high, and can be tilted up to 60 degrees while rack mounted
Analog and Digital Screen Formats and Frame Rates
All signal types and frame rates are automatically detected
& 525 - 60i / 625 - 50i (Interlaced NTSC/PAL)
& 720 x 486P (Progressive)
& 720 x 576P (Progressive)
& 960 x 487i (Interlaced)
& 960 x 675i (Interlaced)
& 720 x 1280 - Digital 50P, 59.94P, 60P (Progressive)
& 1035 x 1920 - 59.94i, 60i (Interlaced)
& 1080 x 1920 - 50i, 59.94i, 60i / 30p, 29.97p, 25p, 24p, 24sF, 23.98p, 23.96sF
  • Compact 3RU
  • Two 7.0" LCD Color Video Monitor
  • High Resolution, 800x480 pixels
  • 16:9 Widescreen Native Aspect Ratio, Switchable to 4:3
  • 2 HD/SD SDI (SMPTE292M/296M/SMPTE259M/ITU-R601) with 1 Reclocked Output
  • 2 SD SDI (SMPTE259M) (ITU-R601) with 1 Reclocked Output
  • Changeable HD/SD SDI Module and SD SDI Module
  • Composite PAL/NTSC (ITU-R BT.470/SMPTE170M)
  • All Inputs Automatically Terminate
  • Active Loop Through is Available for All Analog Signals
  • NTSC/PAL Auto-Detection
  • Four Channels Audio Meter (VU and PPM) Displaying for Analog, AES/EBU and Embedded Audio
  • One Pair Audio Monitoring via Headphone Jack
  • Front Panel Controls for Color, Tint/Hue, Contrast, Brightness, Marker, Aspect Ratio, Under Scan, Blue Only, Audio Meter Control with On-Screen Display
  • Built-In Color Bar Generator for Each Display
  • Red/Green Tally Lights
  • Low Power Consumption
Size 7.0"
Aspect ratio 16:9
Resolution (dots x lines) 800 x 480
Color 262k, 18 bits
Dot pitch 0.0635 x 0.1905mm
Viewing Angle left=70°, right=70°, top=50°, bottom=60°
Luminance (White) 400cd/m/2
Contrast 400:1 (typ.)
Display Area 158 x 91mm
Response Time Tr: 15ms, Tf: 30ms
LCD lamp life 15,000 hours (avg.)
General Specifications
Chassis Type 3RU, 19" rack mounting
Dimensions (HxWxD) 19.125" x 5.15" x 2.44" (485 x 131 x 62 mm)
Power Consumption < 25W
Weight Approx. 6.6lbs (3kg)
Power Supply 100-240 VAC, 50/60Hz
Chassis Type 3RU, 19" rack mounting
Dimensions (HxWxD) 19.125" x 5.15" x 2.44" (485 x 131 x 62 mm)
Power Consumption < 25W
Weight Approx. 6.6lbs (3kg)
Power Supply 100-240 VAC, 50/60Hz
2 HD/SD-SDI Inputs
1 HD/SD-SDI Active Loop Through Output
3 Composite Inputs or 1 S-Video Input or 1 YUV Input
4 Analog Audio Inputs
2 AES/EBU Inputs
Embedded Audio Support
4 Channel Audio Meters (VU & PPM)
1 Pair Audio Monitoring via Headphone Jack
Tri-color Tally Display
H/V Delay, Safe Marker, Aspect Ratio and Blue Only Support