Upconverter with HD/SD-SDI Input

The 9067 is a format converter specifically designed for SD to HD conversions. It provides SD-SDI input, video proc, embedded audio routing controls, frame sync, and user audio/video level controls.

The 9067 also provides AFD functions that detect the incoming AFD code, allow independent custom ARC to be applied for each incoming AFD code, and set the desired AFD code to be inserted on the output, even if there is no code detected on the input. Closed captions and timecode are preserved through upconversions.

Full user remote and card-edge proc control with user memory that allow adjustment of gain, offset, saturation, hue, audio levels, audio routing, frame sync, and many other controls. Factory presets enable a return to factory settings.

• HD/SD digital inputs
• HD/SD closed captioning and timecode support
• Upconversion and aspect ratio conversion
• AFD code insertion and AFD ARC control
• User offset to frame sync to align Dolby® delay
• Selectable safe action, safe title, and center cross overlays
• Frame Sync with tracking audio delay
• Embedded audio offset adjustment for lip-sync alignment
• Audio channel mapping and level control
• 16 user presets
• Remote control/monitoring via DashBoard™ software or OGCP-9000/CC remote control panel
• Detail enhancement and noise reduction
• Five year warranty

HD/SD-SDI Input	Number of Inputs: 1
Standard:	SMPTE 292 and 259M
Return Loss:	>15 dB at 5 MHz - 1.485 GHz
Reference Video Input	Number of Inputs: 2 looping (openGear™ frame)
Standard:	Tri-level sync (SMPTE 274) and Black Burst (NTSC and PAL)
HD/SD-SDI Output
Number of outputs:	4 Reclocked
	4 Processed
Standard:	SMPTE 292 and 259M
Signal Level:	800 mV nominal
Return Loss:	>15 dB at 5 MHz - 270M Hz
	>12 dB at 270MHz - 1.485 GHz
	Jitter: HD: < 0.15 UI
	SD: < 0.1 UI
Embedded Audio:	16-Ch S
Power	18 watts