38 produits
328,90 HT
393,36 TTC
393,36 TTC
Marque : ATIAUDIO
- Ref : BI400
Convertisseur standard audio symétrique / asymétrique bi directionnel (dans les 2 sens). Niveaux réglables en façe avant.
2 IN XLR (symétriques 600 ohms) vers 2 OUT RCA / CINCH (asymétriques)
2 IN RCA / CINCH (asymétrique s+4dbm) vers 2 OUT XLR (symétriques) ultra compact et léger.
427,90 HT
511,77 TTC
511,77 TTC
Marque : ATIAUDIO
- Ref : AMM200
AMM200 est un amplificateur stéréo complet, entrée XLR symétrique et sorties amplifiées, driver de casque stéréo plus 2 bargraphs LED.
622,90 HT
744,99 TTC
744,99 TTC
Marque : ATIAUDIO
- Ref : MMA400-2-PH15
721,90 HT
863,39 TTC
863,39 TTC
Marque : ATIAUDIO
- Ref : MMA400-2-PH48
ATI MMA Serie Line and Mic Amplifiers give you four or eight individual channels to boost either line or mic level balanced inputs up to +24dBm, 600 ohm line levels with either active or transformer balanced outputs.
1.479,90 HT
1.769,96 TTC
1.769,96 TTC
Marque : ATIAUDIO
- Ref : ADAC-2
ATI Digital Audio presents ADAC-2, your single point of choice for unsurpassed A-to-D, D-to-A and digital sample rate conversion. Audio
performance is uncompromised, with engineering by ®
328,90 HT
393,36 TTC
393,36 TTC
Marque : ATIAUDIO
- Ref : BU400B
Convertisseur 4 canaux XLR Balanced vers Unbalanced RCA, entrée sortie XLR et RCA à l'arrière. L'alimentation n'est pas incluse.
394,90 HT
472,30 TTC
472,30 TTC
Marque : ATIAUDIO
- Ref : DP100
The DP100 is level and impedance matching interface for semi-pro, industrial and consumer audio equipment operating into professional balanced 600-ohm systems.
222,90 HT
266,59 TTC
266,59 TTC
Marque : ATIAUDIO
- Ref : MicroAmp 4-MA
172,90 HT
206,79 TTC
206,79 TTC
Marque : ATIAUDIO
- Ref : MicroAmp SV-S
La Série MicroAmpl AV permet de transmettre jusqu'à quatre signaux vidéo Composite, une S-vidéo et un maximum de quatre signaux audio asymétriques via le UTP (unshielded twisted pair) par câble dans une connexion de point-to-point. Le SV-S transmet un canal de S-vidéo et deux canaux audio. La transmission est bidirectionnelle.
407,90 HT
487,85 TTC
487,85 TTC
Marque : ATIAUDIO
- Ref : DA103
ATI DA103 Audio Distribution Amplifiers are inexpensive high performance amplifiers designed to split and isolate audio signal lines.
592,90 HT
709,11 TTC
709,11 TTC
Marque : ATIAUDIO
- Ref : DA1000
With their new higher power outputs (+26dBm) at lower noise (-100dBm EIN) the updated DA1000 and the DA2008 are ideal for every application and every budget.
1.529,90 HT
1.829,76 TTC
1.829,76 TTC
Marque : ATIAUDIO
- Ref : DA1008-1
With its new higher power output and lower noise, the updated DA1008-1 is ideal for every application and every budget. With the DA1008-1, youll avoid RF and hum pick-up problems from noisy, lossy splitters, eliminate hard-to-find shorts from multiple taps on critical lines, boost low console outputs, drive long lines and eliminate rolloff and distortion from mismatched load impedances.
592,90 HT
709,11 TTC
709,11 TTC
Marque : ATIAUDIO
- Ref : DA2008-1
Avec sa nouvelle puissance de sortie plus élevée et un faible bruit, le DA2008-1 mis à jour est idéal pour chaque application et pour chaque budget. Le DA2008-1 vous évite le RF et le bruit du hum pick-up, diviseurs de lossy, empêche hard-to-find shorts du multiple taps sur les lignes critiques, amplifie les basses sorties de console, drive long lines et élimine rolloff et la distortion des impédances mal adaptées a la charge.
1.909,90 HT
2.284,24 TTC
2.284,24 TTC
Marque : ATIAUDIO
- Ref : DA2016-1
Avec sa nouvelle puissance de sortie plus élevée et un faible bruit, le DA2016-1 mis à jour est idéal pour chaque application et pour chaque budget. Le DA2016-1 vous évite le RF et le bruit du hum pick-up, diviseurs de lossy, empêche hard-to-find shorts du multiple taps sur les lignes critiques, amplifie les basses sorties de console, drive long lines et élimine rolloff et la distortion des impédances mal adaptées a la charge.
1.729,90 HT
2.068,96 TTC
2.068,96 TTC
Marque : ATIAUDIO
- Ref : DA2016-2
With their new higher power outputs (+26dBm) and lower noise (-100dBm EIN) the updated DA1008 and DA2016 Series are ideal for every application and every budget.
Avoid RF and hum pick-up problems from noisy, lossy splitters. Prevent hard-to-find shorts from multiple taps on critical lines. Boost low console outputs. Drive long lines. Eliminate rolloff and distortion from mismatched load impedances. These ATI DAs are designed for desktop mounting, and can be rack mounted in 1RU of space with our Accessory Rack Mount Kit.
Reliable barrier block connectors with fan-out strips for easy prewiring and quick change
servicing are standard.
1.389,90 HT
1.662,32 TTC
1.662,32 TTC
Marque : ATIAUDIO
- Ref : DDA-212XLR
La nouvelle Série 2, DDA-212XLR vous donne de nouvelles fonctions et plus de flexibilité. Maintenant vous pouvez distribuer de laudio numérique jusqu'à 192kHz avec un très faible jitter et un temps de traitement ultracourt.
1.389,90 HT
1.662,32 TTC
1.662,32 TTC
Marque : ATIAUDIO
- Ref : DDA212-XLR
DDA212-XLR model use XLR connectors and operate from and drive a 110-ohm balanced shielded twisted pair distribution system per AES3-1992.
141.509,90 HT
169.245,84 TTC
169.245,84 TTC
Marque : ATIAUDIO
- Ref : DDA224-BNC
Les séries DDA d'amplificateurs audio Digital sont conçues pour régéner, isoler et distribuer les données audio numériques composées selon les caractéristiques AES3-1992 et CEI 958. Ceci s'appelle généralement l'AES/EBU composition.
407,90 HT
487,85 TTC
487,85 TTC
Marque : ATIAUDIO
- Ref : DMA103
Your DMA103 Audio Distribution Amplifiers are inexpensive high performance amplifiers designed to split and isolate audio signal lines.
The DMA103 accepts a microphone level input signal and provides either line or microphone level outputs to drive balanced or unbalanced lines. Phantom microphone power is provided and all audio connections are made using XLR type connectors
358,90 HT
429,24 TTC
429,24 TTC
Marque : ATIAUDIO
- Ref : DMM104
The DMM104 accepts AES/EBU and S/PDIF digital audio inputs in the four most popular formats: 110 ohm balanced XLR, 75 ohm BNC, RCA and TOSLINK optical fiber. The DMM104 duplicates the input and provides four (4) S/PDIF digital audio outputs on RCA connectors as well as a TOSLINK optical fiber output.
572,90 HT
685,19 TTC
685,19 TTC
Marque : ATIAUDIO
- Ref : DSA106-BNC
The DSA Series operates much the same as the DDA Series; however, the DSA
Series does not include the full featured display front panel and does not provide
re-clocking of the digital input signal. The non-reclocking feature is essential
when distributing Dolby E encoded AES signals and other clocked signals that
should not be re-clocked.
DSA106-BNC models use BNC connectors and operate from
and drive single-ended 75-ohm coaxial cable per AES-3id-1995 and are
designed to integrate easily into video facilities.
652,90 HT
780,87 TTC
780,87 TTC
Marque : ATIAUDIO
- Ref : DSA124-BNC
The DSA Series operates much the same as the DDA Series; however, the DSA
Series does not include the full featured display front panel and does not provide
re-clocking of the digital input signal. The non-reclocking feature is essential
when distributing Dolby E encoded AES signals and other clocked signals that
should not be re-clocked.
DSA124-BNC models use BNC connectors and operate from
and drive single-ended 75-ohm coaxial cable per AES-3id-1995 and are
designed to integrate easily into video facilities.
790,90 HT
945,92 TTC
945,92 TTC
Marque : ATIAUDIO
- Ref : DXA106-BNC
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
790,90 HT
945,92 TTC
945,92 TTC
Marque : ATIAUDIO
- Ref : DXA106-XLR
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
DXA106-XLR models use XLR connectors and operate from and drive a 110-ohm
balanced shielded twisted pair distribution system per AES3-1992.
889,90 HT
1.064,32 TTC
1.064,32 TTC
Marque : ATIAUDIO
- Ref : DXA112-BNC
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
889,90 HT
1.064,32 TTC
1.064,32 TTC
Marque : ATIAUDIO
- Ref : DXA112-XLR
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
DXA112-XLR models use XLR connectors and operate from and drive a 110-ohm balanced shielded twisted pair distribution system per AES3-1992.
939,90 HT
1.124,12 TTC
1.124,12 TTC
Marque : ATIAUDIO
- Ref : DXA124-BNC
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
988,90 HT
1.182,72 TTC
1.182,72 TTC
Marque : ATIAUDIO
- Ref : DXA212-XLR
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
DXA212-XLR models use XLR connectors and operate from and drive a 110-ohm
balanced shielded twisted pair distribution system per AES3-1992.
99,90 HT
119,48 TTC
119,48 TTC
Marque : ATIAUDIO
- Ref : DXA224-BNC
The DXA Series of Digital Audio Distribution Amplifiers is designed to regenerate,
isolate and distribute digital audio data formatted in accordance with
specifications AES3-1992 and IEC 958. This is commonly called AES/EBU
formatting.
1.729,90 HT
2.068,96 TTC
2.068,96 TTC
Marque : ATIAUDIO
- Ref : PB2X8
The PB2X8 provides two high quality XLR inputs that can be individually switched or mixed into any of eight isolated line level outputs. Each input may be individually switched for microphone or line levels with phantom power and low-cut filters available for the microphone inputs.
1.479,90 HT
1.769,96 TTC
1.769,96 TTC
Marque : ATIAUDIO
- Ref : MCDA-112
Le MCDA-112 fournit une référence ultra-stable d'horloge et un amplificateur de distribution d'horloge 1X12 dans un chassis 1RU.
454,90 HT
544,06 TTC
544,06 TTC
Marque : ATIAUDIO
- Ref : NG-1
The NG-1 Audible Noise Generator provides both "Pink" or "White" noise and is a useful tool for broadband level matching of multiple microphones in studios, teleconferencing rooms and A/V installations. The NG-1 is an excellent source of background masking noise for injection into office background music systems or via direct acoustic radiation into small rooms.
222,90 HT
266,59 TTC
266,59 TTC
Marque : ATIAUDIO
- Ref : MicroAmp 4-CV
La Série MicroAmpl AV permet de transmettre jusqu'à quatre signaux vidéo composites. Une S-vidéo et un maximum de quatre signaux audio unbalanced via le UTP (unshielded twisted pair) par câble dans une connexion de point-to-point.
Le 4-CV est composé de quatre canaux vidéo composites.
172,90 HT
206,79 TTC
206,79 TTC
Marque : ATIAUDIO
- Ref : MicroAmp CV-S
La Série MicroAmpl AV permet de transmettre jusqu'à quatre signaux vidéo Composite.
; une S-vidéo et un maximum de quatre signaux audio asymétriques via le UTP (unshielded twisted pair) par câble dans une connexion de point-to-point.
417,90 HT
499,81 TTC
499,81 TTC
Marque : ATIAUDIO
- Ref : BGD200-PPM
Le BGD200 montre jusqu'à douze lignes audio critique dans (seulement) un espace de support simple.
417,90 HT
499,81 TTC
499,81 TTC
Marque : ATIAUDIO
- Ref : BGD200-VU
Your BGD200 and BGD400 bargraph audio displays are an effective and economical
means of displaying multiple audio lines. They can give you that warm comfortable
feeling that there really is audio going out with your video, audio is feeding the switcher,
and there definitely are outputs to your phone.
601,90 HT
719,87 TTC
719,87 TTC
Marque : ATIAUDIO
- Ref : BGD400-PPM
601,90 HT
719,87 TTC
719,87 TTC
Marque : ATIAUDIO
- Ref : BGD400-VU
Le BGD400 : vu-mètre audio est le moyen efficace et économique d'afficher des lignes audio multiples.
38 produits